All GreenSeam™ Snap Lock Pipe is supplied with a pre-installed butyl gasket that, once snapped together, is self sealing requiring no additional sealing of the longitudinal seam. On average, leakage along the longitudinal seam is 95% less than with conventional snap-lock pipe. All pipe is available with yellow union label only.

Available in three styles, a variety of alloy types, and with or without dampers. All HETOs are supplied with a 1/8” thick high density polyethylene gasket. Crimped ends are standard, but plain ends are an available option. All fittings are available with blue or yellow union label.

Conicals are available in (2) styles in a variety of metals with an optional scoop, and damper and stand-off hardware. Crimped ends are standard, but plain ends are an available option. Press-On Conicals are supplied with a 1/8” thick high density polyethylene gasket. All fittings are available with blue or yellow union label.

Three styles are available in a variety of metals. All Collars come standard with crimped ends with plain ends available. All Press-On Collars are supplied with a 1/8” thick high density polyethylene gasket. Six inch long Collars are available with or without dampers and stand-off hardware. All Collars without tabs are available with an optional scoop. All fittings are available with blue or yellow union label.

90° and 45° elbows are available in a variety of sizes. Various gauges of G-60 galvanized steel are available, or a variety of specialty metals. All Elbows come standard with one end crimped, but are available with both ends crimped as an option. All fittings are available with blue or yellow union label.

Two styles of couplers in a variety of sizes are available in 26 gauge and 24 gauge G-60 galvanized steel, as well as various specialty metals. All dampered Couplers come standard with Ductmate’s Patented Low Leakage Hardware, with the available option of 1½” or 2” stand-off hardware. All fittings are available with blue or yellow union label.

Two styles of Tee Joints are available in various sizes in 26 gauge and 24 gauge G-60 galvanized steel, or a selection of specialty metals. All Tees come standard with one end crimped. All fittings are available with blue or yellow union label.

Reducers are available in various reduction combinations in 26 gauge and 24 gauge G-60 galvanized steel, or a variety of specialty metals. End Caps in a variety of sizes are available in 26 gauge and 24 gauge G-60 galvanized steel, or various specialty metals. All Reducers and End Caps come standard with plain ends, but crimped ends are an available option. All fittings are available with blue or yellow union label.

Ductmate’s patented low-leakage hardware designed to seal & reduce leakage on all dampered fittings, and is available exclusively on Ductmate’s dampered fittings. Use stand-off hardware for dampered fittings in insulation applications—available in 1½” and 2” heights. All fittings are available with blue or yellow union label.