Aerosol Edge Coating Spray – Quick-Stick™ Fiber Guard
Encapsulating Edge Coating
Quick-Stick Fiber Guard is a quick, convenient aerosol edge coating spray that will encapsulate the leading edge or any tears or cuts in HVAC duct liner insulation, and also works with fiberglass duct board.
Description
Quick-Stick Fiber Guard provides a highly durable, non-tacky encapsulating edge coating to all types of HVAC insulations, including fiberglass, polyester, and elastomeric, with great coverage per can.
Special Characteristics
- Quick, convenient aerosol spray can, self-contained, disposable
- Non-tacky finish when product is cured
- Strong spray force to penetrate duct insulation
- Quick, tack-free time
- Highly durable and flexible coating
- Permanent bond to insulation or fiberglass duct board
Application
Do not use or store near flame or any source of heat. Applied to the leading edge, cuts, or tears in duct liner insulation or fiberglass duct board to provide an encapsulating coating preventing any fibers from entering the air stream. Apply per industry standards.
Technical Information
| PROPELLANT: | Aerosol |
| FLAMMABILITY: | Flammable (Only in Wet State) |
| COLOR: | Black |
| ODOR: | Light |
| SPRAY FORCE: (2 in. from substrate) | > 0.90 ozF |
| SOLIDS: | 26-31% |
| DRY TACK: (ATSM D195) | < 0.05 ozF |
| TACK FREE TIME: | < 15 minutes |
| SHELF LIFE: | 12 Months |
| APPLICATION TEMPERATURE: | 60-100°F |
| RELATIVE DENSITY: | 0.938 |
| COVERAGE: (based on single pass, 2 in. from substrate) | 50 sq ft per can |