Hurricane Air Brace: Strength to Weather the Storm

The Hurricane Air Brace is a direct-mount hanging bracket to support condenser units, heat pumps, and other HVAC equipment, particularly useful in residential or multi-family dwelling applications where flooding, snowfall, mud, and steep grades are a concern.

Engineered and tested to withstand the toughest hurricanes, the Hurricane Air Brace is certified for lateral and uplift wind pressure. It meets the 2023 Florida Building Code, 8th Edition, and has Florida Product Approval (FL#47567.1) for use in high-velocity hurricane zones. Whether you’re in a coastal area or simply preparing for severe weather, you can count on dependable support and greater peace of mind.

Precision-made from laser-cut 16-gauge galvanized or 304 stainless steel, this heavy-duty bracket can be mounted on concrete block/brick, concrete, steel studs, wood studs, and hollow concrete block.  Its elevated design protects units from flooding, storm surges, and snow, while improving airflow for better performance and efficiency.

Installation is a breeze, requiring no ground leveling, which is ideal for steep, soft, or muddy terrain. This mounting method also simplifies maintenance, making inspections and service safer and easier.

Built tough and tested for extreme conditions, the Hurricane Air Brace delivers the dependable support HVAC equipment needs to weather the storm.

Physical Engineered Raised Seal Drawings are available upon request (additional fee will apply).

FEATURED PRODUCTS

Pre-Punched Trapeze Duct Hanger

The Pre-Punched Trapeze Duct Hanger is a specialized duct support channel designed to support rectangular and oval ductwork. Made from 18-gauge galvanized steel and measuring 2″ high x 1.5″ wide, this lightweight and easy-to-cut product arrives at the job site in 20-foot lengths, pre-punched with oval holes at 2-inch intervals for immediate use.

Its versatile design eliminates the need for hard-to-cut and punch-angle iron, and it can be standardized to replace multiple hanger types, thereby potentially reducing inventory costs. The hanger’s neat, professional appearance is complemented by the option to insert heavy neoprene gaskets for sound isolation, and it can be secured to structural members up to 1.5 inches thick using its beam clamp.

Cable Shark Cable Hanging System

Our innovative, next-generation Cable Shark® Cable Hanging System is designed and engineered specifically to meet the unique demands and challenges of hanging commercial HVAC duct systems. With unparalleled safety, strength, and reliability, the Cable Shark mechanisms feature an advanced design that includes exclusive built-in load indicators and an easy-to-use load setter/adjustment tool. This helps ensure each system is properly engaged, providing added protection and peace of mind that you and your clients deserve.

A wide range of high-performance accessories are available to be used with the Cable Shark system for versatility on even the most challenging installations, featuring site kits, pivoting eyelets, bracket adapters, rectangular/round duct hanger brackets, studs, and a wide range of cut-to-length cable options with attachments and in 500’ and 1000’ spools.

Isolation Hanger Type SI

The Isolation Hanger Type SI is a sturdy, vibration-isolating steel hanging bracket featuring a rubber isolation pad, designed for use with threaded rods to suspend ductwork and other equipment, isolating vibration at its source.

Capable of supporting up to 1100 lbs (499 kg), the sturdy tension brackets have a much greater load-bearing capacity than the corresponding threaded rods.  Its styrene-butadiene rubber padding isolates vibration at its source, preventing distracting noise transmission and extending the lifespan of HVAC equipment by reducing wear and tear. The outside dimensions match standard wrench sizes, so no special tools are required, making installation easy. The open space of the bracket corresponds to the width of the nut, preventing it from turning.

INDUSTRY NEWS & MORE

Hurricane Air Brace Approved for Use in Florida’s High-Velocity Hurricane Zone

Ductmate’s Hurricane Air Brace direct-mount HVAC hanging bracket has earned a Florida Product Approval Number (FL# 47567.1)! Classified as a structural component and pre-engineered air-conditioning stand, the Hurricane Air Brace is approved for use both inside and outside Florida’s High-Velocity Hurricane Zone, commonly known as the HVHZ.

Click here to read the full article.

Indoor vs. Outdoor Duct Sealants: Choosing the Right Product

Ductwork plays an important role in delivering conditioned air efficiently throughout residential, commercial, and industrial buildings. When joints, seams, penetrations, and connections are not properly sealed, air can escape before reaching its destination. Duct sealants help reduce leakage, but the surrounding environment determines which performance features matter most.

From mechanical rooms to rooftops, choosing sealants that withstand each environment’s unique demands will support long-lasting HVAC system protection and optimal performance.

Click here to read the full article.

Rapidmate Exclusive Advanced Labor-Saving Features Video

Tired of machine jams, slow reloads, and uneven seals during duct assembly? The Rapidmate Corner and Fastener System is the most advanced, labor-saving corner lineup in the industry. Engineered specifically to overcome the common failure points of traditional corners, Rapidmate delivers unprecedented speed and reliability in both the shop and the field.

Ready to Buy?

Ductmate products are available at over 350 locations across the US as part of a selective distribution network.  Use the Ductmate distributor locator map to find a distributor near you.

Outside the US? Check out our international distributor list.  For detailed information on product availability, lead times, or other international sales requests, please email ductmate@ductmate.com.

Sign up for Ductmate’s e-Newsletter

Don’t miss our monthly e-newsletter! Click here and sign up to receive exclusive Ductmate news and announcements, product information, promotions, industry news, and more, right in your inbox.

Connect With Us on Social Media

Follow Ductmate on our Facebook, Instagram, LinkedIn, and YouTube social media accounts to stay up-to-date with the latest news!

‍