NEW! Gecko Glue Gold
Gecko Glue™ Gold is used to:
- Bond duct liner insulation to galvanized duct work – Ductmate PolyArmor™ or fiberglass insulation
- Seal cut edges of fiberglass insulation
- Bond kraft-backed foil covering to fiberglass
- Bond multiple layers of fibrous insulation board
Description
Gecko Glue™ Gold is a versatile, easy-to-use, premium water-based duct liner adhesive. Gecko Glue™ Gold works effectively using a variety of application methods and dries faster than typical water-based adhesives to bond duct liner insulation with sheet metal.
Gecko Glue™ Gold can be sprayed and dripped on coil lines, roll-applied through roto-bonders, sprayed off line, and manually rolled or brushed on.
Special Characteristics
- Spray, drip, roto-bond and manually apply
- Water-based adhesive
- Fast tacking
- Non-flammable in wet and dry states
- Solvent free
- UL Classified
- Wipes clean with water
- Exceptional coverage
- LEED® Compliant, meets all applicable EPA Method 24 and CDPH standards Conforms to NFPA 90A and 90B requirements
Technical Information
CHEMICAL TYPE: | Synthetic Latex |
COLOR: | Black or White |
ODOR: | Minimal |
VOC CONTENT: EPA Method 24 | Pass - Very Low |
TVOC Emissions: CDPH Standard Method v1.1 | Pass |
DENSITY: | 8.6 +/- 0.2 lbs per gallon |
SOLID CONTENTS: | 65% +/- 2% |
VISCOSITY: | 9,000 cPs +/- 2,000 cPs |
APPLICATION TEMPERATURE: | 20°F to 90°F |
STORAGE TEMPERATURE: | 20°F to 90°F |
DRY TIME: | 8 minutes at 76°F Depending on temperature, humidity, and recommended coverage |
COVERAGE: | Approximately 400 sq. ft./gal. Depending on application technique |
SHELF LIFE: | 1 year (unopened container) |