Round Duct Strap Bracket
To suspend round ductwork.
Description
Round Duct Strap Bracket is used in conjunction with strapping and threaded rod or the Cable Shark Hanging Adapter (sold separately).
Special Characteristics
- No tools needed
- Can be used with ductwork up to 50” in diameter
- Fits strapping 1” in width, gauges 18-22
- Can be used with 5/16” – 3/8” rod
- Can be used with Cable Shark Hanging Adapter (sold separately)
- Load Limit: 125 lbs
- Part Number: DM4703GA
- Gauge: 14GA
STOP! IMPORTANT INFORMATION
Before using or installing the product, read and follow all product information and warnings. Do not use the product in a manner that is inconsistent with the manufacturer’s printed information. Ensure that all employees installing the Cable Shark System have been properly trained on using this product.
WARNING
- Use ONLY Cable Shark Cable when using the Cable Shark System.
- Use ONLY the correct sized Cable Shark Cable, corresponding to the Cable Shark mechanism.
- ALWAYS INSPECT cable for WEAR, DAMAGE, or ABUSE BEFORE and DURING USE.
- NEVER USE cable that is DAMAGED or ABUSED.
- NEVER REUSE cable or mechanisms under any circumstance.
- DESTROY and DISCARD used, worn out, or damaged cable in a fashion that does not permit the use by someone who does not know the hazard.
- Cable WILL FAIL if used, worn-out, overloaded, misused, damaged, improperly maintained, or abused.
- DO NOT use beyond the appropriate factor of safety.
- ALL USERS should be informed of ALL cable and safety precautions.
- REFER TO all applicable codes, standards, and regulations for inspection requirements and removal criteria.
- WHEN SELECTING an upper attachment, consult SMACNA Duct Construction Standards, Hangers, and Supports.
- CABLE FAILURE may cause serious injury or death.
- PROTECT yourself and others.
RESPONSIBILITY FOR THE PROPER AND SAFE USE OF THE CABLE RESTS WITH THE USER.